How To Make Your Own Washers Game

If the washer lands in the cup or hole in the middle of the box, they get more points. Diy washer yard game rules:

How to make a washer toss game Washer toss, Toss game

We used 2 screw per side for a total of 8 screws to attach the base.

How to make your own washers game. In this instructable i'm going to teach you how to make a washer toss game. The oxidation will do the rest. Paint your washers two different colors (one for each team)!

When tossing, players may not step past the front edge of the box that they’re standing next to. The 3 holes are placed 9″ from the edge and centered from the top down 7 1/2″, then 15 3/4″ from the top on center, and finally the third is 24″ from the top on center. Washer toss game diy instructions.

Screw them together with two 2.25 wood screws to make 4 16 sides. We used a scrap piece of wood as a straight edge. The boxes are set 21′ apart and the rules are simple:

Outside box dimensions are 16, so you need 4 pieces of 2x4, 14.5 long (the other 1.5 is the width of the 2x4). One way to make your wooden boards look old and cool is to put a layer of black tea on them. Just make a pot of tea and let it cool down.

Toss the washer into the other box. Washers, also known as washer toss, is a fun yard game similar to horseshoes where 2 or 4 players compete to throw washers into a box. This fun game is played using two boxes with a piece of pvc pipe in the middle.

Washer toss game plans material list. The base is 3/4 plywood, 16. Here's how to play, how to keep score, and how to build your own hillbilly horseshoes game.

Build your own washers sets. Best paint for washers game Below is the material list for one game set.

I’ll outline my house rules, but the most important thing is to have fun playing the game. 2x4, plywood, pvc, washers, screws and glue.go to the nex… Using the trim screws, attach the plywood to the bottom of the box frame.

Each team tosses 4 washers per turn. Diy washer toss game plans free washer toss game plans our version of the game is based on a game that was given to us by our friends and neighbors a few years ago (thanks again tom and penny!). Be sure the the pvc tracing is face up inside the box.

If you do a little searching on the internet, you’ll find more ways to play the game than you can throw a washer at. “washers” is also known as “southern horseshoes” and involves throwing washers into a box to score points. This washer toss game is really fun to play, and it's easy and cheap to make.

The cup in the center is a 5.5” tall piece of 4” pvc. Build your own washers game. Then apply a thin layer of it on the wood and leave it to dry.

Player 1 will toss all three of their washers, followed by player 2. You’ll be surprised how much of a difference this little trick can make! Once, you’ve finished making your washer toss game set, the real fun begins!

Keep in mind a lot of this material may be items you already have tucked away in the corner of your workshop. If you’ve never played washers before, then this summer is a great time to start! Put pvc to the side.

It’s a simple design and is easy to put together. My first encounter with this game was while visiting family. Building your own washer toss game is relatively simple, and it can be completed in a couple of hours (although there is some dry time required for the adhesive).

Grab one box frame and one piece of plywood. You get 3 points for each one in. Take your boxes and find the center (8 inches from the side) and draw a line down the middle.

How to make washer toss game: Once all the pieces have been cut, drill the 4″ holes in each of the 18″ x 36″ plywood pieces. It requires few materials, including:

Teammates stand on opposite ends of the field, near their own boxes. It is 16” square with 5.5” tall sides. Repeat to assemble second box.

Make your own washers game. I purchased a 4×8 piece of plywood and cut it into two pieces of 2′ x 4′, but you can get it cut right at the home depot if you can’t cut it. Add both washers and subtract from 18 = 10) if you make all three washer in the same hole on your turn you automatically win the game.

I am wanting to build several of these for other family and friends and have no problem finding all the materials except for the washers. The goal of the game is to land a washer in either the pvc coupler or “cup. How to build a washers game.

Players stand behind each box. (i.e., current score 18, scores 3 for 21 but scores a second washer counting 5 which equals 26. Build two games for friendly competition!!

Remember to measure your materials and set a budget for your project to ensure that you create a board specific to your playing needs. Set the two washer toss boxes 21 feet apart.

How to Build a Washer Game Washers game, Washers game