Diy Camera Strap Cover

Fold your strap in half and trace it on a piece of paper (i used a brown bag) 2. So i made a camera strap cover with two pockets that fits my lens cover perfectly.

Love this camera strap...but I guess I need a nice camera

Slide the strap cover over the existing strap.

Diy camera strap cover. See more ideas about camera strap cover, camera strap, diy camera strap. I tend to lose my camera lens cover. Now you can turn your cover right side out.

Home » sewing » camera strap cover. Mine is just the easiest thing i could think up.} Feed the opposite end of the ruler into the camera strap cover, until it pops out the other end.

Sew along the edge to form a tube. The vinyl piece at each end of your camera strap is a little wider than the fabric part, so you’ll need to fold it in half as best you can and secure it with a tight rubber band to make feeding it into your new fabric strap cover a little easier. I gorilla glued that on.

This camera strap is the easiest to make, you’ll need a rope, needle, and thread. This is your seam allowance. It's just that i sometimes don't have pockets.

Make a diy fabric camera strap cover. 1) measure your camera strap from one end to the other, not including the leather on each end. Worsted weight yarn (i used one ball of lily sugar n cream 100% cotton) size f hook.

June 25, 2009 by mandy beyeler leave a comment. Fold your piece in half, the right side with pocket facing out. (i made mine about 27″ long).

So if you would like to check that tutorial out pop on over and we will show you how! Only i don't have a sewing machine so it had to be 'no sew.'. I’ve been wanting to make one for a while now, especially since getting my camera.

Chain 1, sc into each chain around. Then i took a button cover and used a scrap of material to cover it. Diy camera strap cover this year wes and i thought that in addition to our regular christmas shopping, it would be nice to make some of our gifts ourselves.

The easiest way i’ve found to pull your camera strap through your new cover is to use a ruler with a hole in one end. Thread your camera strap through the cover. You might be surprised how easy it is to diy your very own custom camera strap (and honestly, it’s a whole lot easier than refurbishing a chair or painting the walls!

I liquid stitched this to the strap too, making a circle with one material on the outside and the other in the inside. Sew right sides together with a 1/4″ seam allowance. Today we have a fun tutorial that might come in handy during the vacationing season….an easy diy camera strap cover!

Done, and ready to travel. The crafty girl link party. Today over at simple simon and company we have this same camera strap made but we used a different detail at the end.

I then doubled the width and added 1 inch for seam allowances. I finally got off my bootie and did it. Diy *no sew* camera strap cover tutorial.

{believe me — there are so many great camera cover strap tutorials out there. While this definitely helped with the budget, it was also a nice way to have special, personal gifts for our family. Using a piece of twine or embroidery thread, tie your camera strap to the hole at the end of the ruler.

Instead of quilting we added pom poms! Diy camera strap cover by simple simon and co. Make a chain long enough to wrap snugly around the widest part of your camera strap.

Keep in mind you want the cover about half an inch or so bigger than the strap, so its easy to slide on and off. Add a 1/2″ all the way around your pattern you drew. Diy ruched camera strap slip cover as you know, mom and i have recently gotten the photography bug and like any crafter that wants to “cozy” everything with soft fibers and bright colors, i just had to come up with a camera strap slip cover to cushion my uncomfortable strap that sends a chill down my spine when i hang it around my neck on.

Turn under your ends about a 1/2 in, and sew the edge of your cover shut. Diy camera strap cover with lense cap pocket. If you think the finished cover will be too big for your strap, you can make a wider seam allowance to make the cover thinner.

You will need fabric, paper, pen, scissors, pins, fusible interfacing, thread. Measure a piece of iron on batting to be the same length as your camera strap (around 21. This camera strap cover with pockets tutorial was originally published on simply modern mom.please visit simply modern mom for more tutorials and craft ideas.

Mine measured around 21 inches long by 1 3/4 inches wide. Diy camera strap camera strap cover sewing hacks sewing tutorials sewing projects sewing ideas tutorial sewing sewing. If you are new to sewing then this is a great project to try and if you are an experienced seamstress then it makes for a quick afternoon sew.

Yes there are a million tutorials on making a camera strap cover, but i am showing you how to do it anyway! Slip stitch into the last chain on your hook, joining the two ends to make a ring.

Pretty Camera Strap Covers Camera strap cover, Diy